 Jepson Bolton's International Catalogue
FURNACESMuffle Furnaces Stuart 1200C range
This range encompasses twelve model varying in capacity from 1 87 to 27 litres. All models are fitted with digital controllers having single display of temperature or dual display of temperature and setpoint with
autotune facility. A 16 segment programmer is available as an option. The design features a fully removable control compartment to facilitate servicing and low thermal mass insulation with double skin construction provides a cool exterior with good internal temperature uniformity. The up and over sprung
door is fitted with a switch which disconnects the power when the door is opened.
Models with PD control have single display temperature controllers with set temperature indicated by push button. Models with PID control have fully proportional dual display auto-tune controller indicating both desired and actual oven temperature. The programmer is a direct replacement for the PID controller and provides 16 segments with up to 8 ramp and 8 dwell stages. For operation on 240V 50Hz 1Ph Specification
Dimensions Dimensions Heater
Model Chamber internal external load Weight
type volume ltrs lxwxh mm lxwxh mm kW kg
S1202 1.87 150 x 125 x 100 490 x 520 x 550 1.5 60
S1203 3.17 285 x 150 x 90 490 x 520 x 550 2.0 70
S1204 7.68 355 x 180 x 120 490 x 520 x 550 3.0 80
S1205 14.8 560 x 190 x 140 490 x 520 x 550 5.0 90
S1206 21.0 457 x 229 x 203 730 x 700 x 830 6.0 100
S1207 27.0 457 x 305 x 203 730 x 700 x 830 7.0 110
Ordering information F81-104 - Muffle furnace Stuart S1203PID/S 2.971trs
- £1115.00 F81-108 - Muffle furnace Stuart S1204PID/S 7.68
1trs - £1190.00 F81-116 - Muffle furnace Stuart S1206PID/S 20.2
1trs - £2366.00 F81-120 - Muffle furnace Stuart S1207PID/S 27.3
ltrs - £2535.00 F81-146 - Programmer controller Stuart S502D, 16 segment (8 ramp & 8 dwell) optional replacement for PID controller - £615.00
AccessoriesF81-140 - Chimney (factory fitted at time of ordering)- £63.00F81-142 - Safety thermostat (factory fitted at time of ordering) - £210.00
High Temperature Muffle Furnaces Stuart 1500°CA range of high temperature furnaces suitable for both laboratory and industrial applications. The furnaces are available in three sizes and are heated by silicon carbide elements mounted transversely in the chamber. All models have PID control with fully proportional dual display auto-tune controller indicating both desired and actual furnace temperature. An optional programmer is a direct replacement for the PID controller and provides 16 segments with up to 8 ramp and 8 dwell stages.Specification
Model S1501 S1502 S1503 Chamber volume ltrs 1.8 4.2 8.4 Maximum temperature °C 1500 1500 1500 Dimensions: internal l x w x h mm 230 x 100 x 80 280 x 150 x 100 360 x 180 x 130 external l x w x h mm 830 x 635 x 820 830 x 635 x 820 830 x 635 x 820 Weight kg 65 70 75 Heater load kW 4.0 6.0 7.0 Electrical requirements 240V 50 Hz 1Ph all modelsOrdering information F81-200 - High temperature muffle furnace Stuart 1.8litre 1500°C - £3334.00 F81-205 - High temperature muffle furnace Stuart 4.2litre 1500°C - £4050.00 F81-210 - High temperature muffle furnace Stuart 8.4litre 1500°C - £4059.00 Programmable furnaces also available
AccessoriesF81-220 - Chimney (factory fitted at time of ordering) - £63F81-222 - Safety thermostat (factory fitted at time of ordering) - £210 F81-146 - Programmer controller Stuar S502D, 16 segment (8 ramp & 8 dwell) optional replacement for PID controller - £880 (factory fitted)
|
| |||
| Informal IT | HOME | CONTACT US | Webmaster |
| © Jepson Bolton Ltd. Site designed & maintained by Gemini Scientific Ltd | |||